Low Intensity Magnetic Separator<
Low Intensity Magnetic Separator< consist of separator drum, magnetic system, separator tank, transmission device and overflow devices for feeding and discharging. Magnetic separator is mainly used in wet separating of the fine minerals with strong ferromagnetism. The wet-type drum permanent magnetic separator is mainly suitable for wet separating of the following ores with the sizes less than 3mm, which are magnetite, magnetic pyrite, baking ore, and limonite and so on.
Wet Magnetic Separator features
- The magnet is made from rare-earth permanent magnetic material--NdFeB; Stainless steel separator drum is covered with rubber to achieve higher separation performance; The wearable ceramic drum is optional.
- Magnetic system adjusting device can adjust magnetic angle to achieve good separation performance.
- CT series wet magnetic separators can be used singly, multiply or parallelly.
- They are suitable for rough or fine separating strong magnetic minerals smaller than 0.2mm.
- Direct access to magnets in chute; Easily installed and extremely easy to clean.
Wet Magnetic Separator Technical Data
| Model | Roller Size DxL (mm) | Speed (r/min) | Capacity (T/h) | Overall Dimension LxWxd (mm) | Power (kw) | Weight (t) |
| CT(S/N/B)-712 | 750x1200 | 35 | 10-15 | 2330x1770x1280 | 3 | 1.85 |
| CT(S/N/B)-718 | 750x1800 | 35 | 20-35 | 2930x1770x1280 | 3 | 2.43 |
| CT(S/N/B)-918 | 900x1800 | 28 | 25-40 | 3095x1769x1465 | 4 | 2.75 |
| CT(S/N/B)-924 | 900x2400 | 28 | 40-55 | 3695x1769x1465 | 4 | 3.65 |
| CT(S/N/B)-1018 | 1050x1800 | 22 | 45-60 | 3115x1999x1565 | 5.5 | 3.6 |
| CT(S/N/B)-1021 | 1050x2100 | 22 | 52-70 | 3415x1999x1565 | 5.5 | 4.2 |
| CT(S/N/B)-1024 | 1050x2400 | 22 | 60-80 | 3715x1999x1565 | 5.5 | 4.8 |
| CT(S/N/B)-1030 | 1050x3000 | 22 | 80-120 | 4315x1999x1565 | 7.5 | 6.26 |
| CT(S/N/B)-1218 | 1200x1800 | 19 | 60-75 | 3150x2300x1920 | 7.5 | 5.85 |
| CT(S/N/B)-1224 | 1200x2400 | 19 | 80-110 | 3750x2300x1920 | 7.5 | 6.97 |
| CT(S/N/B)-1230 | 1200x3000 | 19 | 100-140 | 4350x2300x1920 | 7.5 | 8.5 |
| CT(S/N/B)-1545 | 1500x4500 | 14 | 160-220 | 6050x2700x2300 | 15 | 15 |
| Note: The magnetic strength should be determined in accordance with the nature of the ore. CT series wet magnetic separator can be customer-made. | ||||||